Unexpected Store Exception is a stop error that appears as a blue screen of death (also known as a stop code error) in Windows 10 with the message “Stop code: Unexpected Store Exception.”
Despite the fact that the error’s name includes the word “store,” it has nothing to do with the Microsoft Store. It’s quite inconvenient when our system fails in the middle of a crucial task.
How to Fix Windows 10’s Unexpected Store Exception Error
The purpose of this post is to assist you by providing techniques for resolving an Unexpected store exception that happens on Windows 10. Check out below the solutions.
Method 1: Examine Your Hard Drive’s Health
On Windows 10, the error message “Windows detected a hard disc problem” indicates that your hard drive is failing.
A application like CrystalDiskInfo can be used to check for this problem. Following these procedures will allow you to check the health of your hard drive –
Step 1: Download the software’s ordinary edition.
Step 2: Start the installation programme.
Step 3: Run the application.
If your computer has many hard drives, you may switch between them using the tabs at the top of the screen.
Check the Health Status, which will be displayed on the screen, to see the status of your hard drive.
The health of your hard drive is determined by a number of criteria, which are listed in a table at the bottom of your screen.
Your drive’s health status indicates that it is in good working order and that it is not in need of replacement.
Caution or Bad Health The status implies that you should replace your hard disc as soon as possible because it is conceivable that it will fail at any point.
However, if you have an additional hard drive, it is preferable to replace the hard disc to avoid such scenarios. This is also one of the most common causes of the Unexpected Store Exception halt code.
Method 2: Install the Most Recent Version of your Display Driver
The above-mentioned problem can potentially be caused by incompatibility issues with the Display drivers.
It is preferable to ensure that it is current. To upgrade your display driver, follow the procedures below –
Step 1: Enter Safe Mode on your computer. If you need assistance booting your Windows 10 in Safe Mode, click the link below.
Step 2: On your keyboard, press Win+X.
Step 3: Select Device Manager from the drop-down menu.
Step 4: Select Display adapters and double-click it. This will show you what graphics card you have.
Step 5: Right-click on the result that appears on your screen and select Uninstall Device from the menu that appears.
Step 6: Double-check it and restart your computer.
Step 7: To access Settings, press Win + I, then select Update & Security.
Step 8: Select Check for Updates from the drop-down menu.
Step 9: Windows should detect the most recent driver and update your machine automatically.
If the procedures above don’t work, go to your graphics card manufacturer’s website and download the drivers according to their instructions.
Method 3: Use the System File Checker Programme
Faulty system files can also be the source of this issue. Fortunately, Windows offers a capability that allows you to check your system and automatically attempt to repair any files that are causing issues.
Follow the steps outlined below to do so –
Step 1: Click Command Prompt by pressing Win + X. (Admin).
Step 2: At the command prompt, type sfc /scannow and then click Enter.
This step will start the scan and then show the message after it’s finished.
It will either say “no integrity violations identified,” indicating that there are no problematic files, or it will say –
1) Windows Resource Protection discovered and successfully fixed corrupt files. The CBS.Log has more information. %WinDir %LogsCBS %WinDir %LogsCBS %WinDir %LogsC CBS.log
2) Windows Resource Protection discovered certain faulty files but was unable to repair them. The CBS has further information. Log %WinDir %LogsCBSCBS.log %LogsCBSCBS.log %LogsCBSCBS.log %LogsCBSC
If you get either of these problems, type the following command into the command prompt to see the log –
%windir%LogsCBSCBS.log >” %userprofile%Desktopsfclogs.txt” %userprofile%Desktopsfclogs.txt” %userprofile%Desktopsfclogs.txt” %userprofile%Desktopsfclogs.txt” %userprofile%Desktopsfclogs.txt
This programme will generate a log file in which you can examine the files that are creating issues.
If the issue still persists after running the command above, you can try reinstalling Windows to receive new copies of everything.
Method 4: Turn off your AntiVirus Software
This problem can also be generated by antivirus software that is interfering with your system’s operation. You can try temporarily disabling your antivirus and seeing if the problem persists.
Disabling your antivirus will differ depending on your software, but it’ll usually be found in the program’s Settings menu.
If you’re using Windows Defender, take the following steps –
Step 1: To launch Settings, use the Windows key + I on your keyboard.
Step 2: Go to Update & Security -> Windows Security -> Virus & Threat Protection -> Virus & Threat Protection settings under Update & Security -> Windows Security.
Step 3: Turn off Real-time protection.
If you have any third-party antivirus software installed, you can try entirely uninstalling it by following these steps:
Step 1: To launch Settings, press Win + I on your keyboard.
Step 2: Navigate to Apps.
Step 3: Select your antivirus programme from the list on the screen.
Step 4: Select Uninstall from the drop-down menu.
If the Unexpected Store Exception error still persists after trying the techniques listed above, make sure to re-enable your antivirus to keep your computer safe. If your computer is left unprotected, it can become vulnerable to a variety of infections.
Method 5: Disable Quick Startup
Fast Startup is a feature that comes pre-installed on all Windows 10 PCs. This feature allows your computer to use a form of hibernation to provide faster boot times, particularly on hard disc drives.
Though it is extremely beneficial, it may cause some drivers to fail to load properly, resulting in an Unexpected Store Exception problem.
As a result, we can try removing Fast Startup to see if our system still has this error. Follow the procedures below to turn off the rapid startup:
Step 1: To open Run, press Win + R on the keyboard.
Step 2: Connect to the control panel.
Step 3: Select “OK” from the drop-down menu.
Step 4: Select Power Options from the left-hand panel, then select what the power buttons do.
Step 5: Make a click Change any settings that aren’t working right now.
Step 6: Untick the box. Fast startup should be enabled (recommended).
Step 7: Save your modifications.
Hopefully, the preceding techniques have assisted you in resolving the Unexpected Store Exception fault and therefore removing the blue screen.
The most common reason of the Unexpected Store Exception blue screen error in Windows 10 is bad hardware. If the problem persists, read through the other techniques thoroughly before attempting to use them.